Ciscomotors C-Max Instrukcje Operacyjne Pobierz pdf (Strona 19)

Pag. 19

INSTALLATION CYLINDER HEAD

1. Install the new cylinder head gasket o-ring (Fig.10)

2. Install the cylinder head and nuts (Fig.9 ), tighten the nuts to the specifed torque.

TORQUE : 12Nm( 1,2 kgf/m)

NOTE:

Tighten the cylinder head nuts in a criss-cross pattern in 2 or 3 steps

INSTALLATION EXHAUST

1. Insert the antivibrating pins thread in the support exhaust (Fig. 6)

2. Pull the exhaust with resolution and insert the spherical entrance on the cylinder (Fig. 8 )

3. Install the springs (Fig.7)

4. Tighten the 2 bolts and nuts to specified torque (Fig.6)

TORQUE: 10Nm( 1 kgf/m)

INSTALL COOLING AIR DUCT

1. Replace the cooling air duct on the cylinder head

2. Tighten the 2 crankcase cap screw, and then the cylinder head cap screw to the spcified

torque

TORQUE: 8Nm( 0.8 kgf/m)

INSTALLATION SPARK PLUG

1. Lubricate the sparks plug thread

2. Tigthen the spark plug to the specified torque

TORQUE : 18Nm( 1.8 kgf/m )

3. Install the spark plug cap.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25

Brak uwag

Ciscomotors C-Max Instrukcje Operacyjne Strona 19